OceanSouth Rib Boat Towing Cover 7.2 - 7.5m

Oceansouth Rib Boat Cover designed to fit rib boats with center consoles and includes rear openings for rear arches.

This cover is constructed of the highest quality 280gsm Atlas marine fabric with flat double lock seam stitching and UV threads ensure an extended life expectancy.

Includes a full set of rope ends, cleats, ratchets and tie-down rope for easy gathering and tightening down the cover.

Trailerable and suitable for highway towing.

Features:

• Design to fit rib boats with centre consoles and rear arches.
• Rear openings for the arches.
• Trailerable and suitable for highway towing
• Water resistant and breathable fabric
• Highest quality 280gsm Atlas marine fabrics (7 year life expectancy)
• Flat double lock seam stitching
• High quality UV threads
• 6mm braided rope encased in hem
• Includes a full set of rope ends, rope cleats, tie-down rope and rope ratchets
• Supplied in a handy bag for storage when not in use

Colour: Light Grey

Also available for storage only: Oceansouth Rib Boat Cover Storage Only

For correct sizing, we recommend to use both the Measuring Instructions and Overall Fabric Measurements guides below to ensure you choose the correct cover size for your boat.

Note: Total length of the fabric has been made to cover the total length of the boat, from the bow to the stern. This must also accommodate for bow rails, rollers or sprit as these additional features will add to the overall length of the cover.

Note: These covers are designed to protect the boat only, and do not accommodate outboards. Vented, Half or Full covers for outboards are sold separately - please see our  Outboard Engine Covers

Measuring your boat

1. Measure the length: Measure the centreline length using a straight measurement from bow to stern.
2. Measure the width: Measure a straight line across the widest point of your boat.

Overall fabric measurements

1. Measure the width: Take the overall fabric width of your suggested cover and compare it by measuring across widest point on your boat and across the highest point of boat fittings (i.e. windscreens, cabins) to the point on the hull where the hem of the cover will finish.
2. Measure the length: Take the overall fabric width of your suggested cover and compare it by measuring across the length of your boat from bow to stern, and across the highest point of any fittings (windscreens, cabins, etc.) to the point on the hull where the hem of the cover will finish.