OceanSouth Inflatable Storage & Towing Cover 3.2m - 3.6m

Designed to fit inflatable boats with low consoles and their outboard motors. The full cut at the rear allows ample room to cover an outboard motor and the semi-custom fitted bow provides a smoother fit.

This cover is constructed of the highest quality 280gsm Atlas marine fabric with flat double lock seam stitching and UV threads ensure an extended life expectancy.

Includes a full set of rope ends, cleats, ratchets and tie-down rope for easy gathering and tightening down the cover.

Ideal for winter or long-term storage and recommended for light trailering use (60km/h max).

Features:

• Design to fit inflatable boats with low consoles and their outboard motors
• Can also be used on boats stored on vertical transom.
• Suitable for long-term storage and light trailering use
• Water resistant and breathable fabric
• Highest quality 280gsm Atlas marine fabrics (7 year life expectancy)
• Flat double lock seam stitching
• High quality UV threads
• 6mm braided rope encased in hem
• Includes a full set of rope ends, rope cleats, tie-down rope and rope ratchets
• Supplied in a handy bag for storage when not in use

Colour: Light Grey

For correct sizing, we recommend to use both the Measuring Instructions and Overall Fabric Measurements guides below to ensure you choose the correct cover size for your boat.

Note: Total length of the fabric has been made to cover the total length of the boat, from the bow to the stern. This must also accommodate for bow rails, rollers or sprit as these additional features will add to the overall length of the cover.

Note: These covers are designed to protect the boat only, and do not accommodate outboards. Vented, Half or Full covers for outboards are sold separately - please see here: Outboard Engine Covers

​Measuring your boat

1. Measure the length: Measure the centreline length using a straight measurement from bow to stern.
2. Measure the width: Measure a straight line across the widest point of your boat.

Overall fabric measurements

1. Measure the width: Take the overall fabric width of your suggested cover and compare it by measuring across widest point on your boat and across the highest point of boat fittings (i.e. windscreens, cabins) to the point on the hull where the hem of the cover will finish.
2. Measure the length: Take the overall fabric width of your suggested cover and compare it by measuring across the length of your boat from bow to stern, and across the highest point of any fittings (windscreens, cabins, etc.) to the point on the hull where the hem of the cover will finish.