Vetus Steering Systems
Filter
99 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Best selling
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
VETUS Nylon hose, Ø 8 x 12 mm (per roll of 100 m) HHOSE8100
Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).- $2,735.00
- $2,735.00
- Unit price
- / per
-
VETUS Nylon hose, Ø 8 x 12 mm (per roll of 50 m) HHOSE8050
Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).- $1,473.00
- $1,473.00
- Unit price
- / per
-
VETUS Nylon hose, Ø 8 x 12 mm (per roll of 30 m) HHOSE8030
Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).- $898.00
- $898.00
- Unit price
- / per
-
VETUS Nylon hose, Ø 8 x 12 mm (per roll of 15 m) HHOSE8015
Suitable for cylinders MTC52-175. Requires hose connectors HS1031MS (straight) or HS1037MS (angled).- $455.00
- $455.00
- Unit price
- / per
-
VETUS Nylon hose, Ø 6 x 10 mm (per roll of 30 m) HHOSE6030
Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.- $707.00
- $707.00
- Unit price
- / per
-
VETUS Nylon hose, Ø 6 x 10 mm (per roll of 15 m) HHOSE6015
Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.- $342.00
- $342.00
- Unit price
- / per
-
VETUS By-pass valve for Ø 10 mm tubing (incl. tube connectors Ø 10 mm) BYPASS10
By-pass valve for Ø 10 mm tubing (incl. tube connectors Ø 10 mm.)- $147.00
- $147.00
- Unit price
- / per
-
VETUS By-pass valve for Ø 8 mm tubing (incl. tube connectors Ø 8 mm) BYPASS8
If a change-over to tiller steering is required an installation of a by-pass valve is necessary.- $124.00
- $124.00
- Unit price
- / per
-
VETUS Fitting kit (10 mm) for dual non-return valve, to be used with K30/140 and MTC5210 to MTC17510 KITK52175
Fitting kit to be used with K30/140 and MTC5210-MTC17510.- $147.00
- $147.00
- Unit price
- / per
-
VETUS Fitting kit (8 mm) for dual non-return valve, to be used with K30/140 and MTC3008 KITK30
Fitting kit to be used with K30/140 and MTC3008.- $193.00
- $193.00
- Unit price
- / per
-
VETUS Dual non-return valve block without fittings, to be used with cylinders MTC3008 to MTC17510 K30/140B
If dual station steering is required, then it is necessary to install this block, or to use two steering pumps with built in non-return valves (type HTPR).- $616.00
- $616.00
- Unit price
- / per
-
VETUS Waterproof seal kit for HTP pump in a HTPF flange HTPF3
HTPF3 can be used for situations where the HTPF or HS1000 wheel adjuster may fill with water. Consists of a rubber seal and a stainless steel trim ring.- $83.00
- $83.00
- Unit price
- / per
-
VETUS Adaptor flange, stainless steel (AISI 316) for HTP pump, 78 mm depth HTPF2
This polished stainless steel flange can be used to fit a pump type HTP to replace an older type MTP pump. It can also be used as a simple embellishment.- $168.00
- $168.00
- Unit price
- / per
-
VETUS Adaptor flange, stainless steel (AISI 316) for HTP pump, 38 mm depth HTPF
This polished stainless steel flange can be used to fit a pump type HTP to replace an older type MTP pump. It can also be used as a simple embellishment.- $130.00
- $130.00
- Unit price
- / per
-
VETUS Hydraulic cylinder for outboard steering type OBC250A (max. 250 hp) OBC250A
Hydraulic steering cylinder for outboard engines / z-drives up to 250 hp. Developed with marine-grade AISI 316L stainless-steel and aluminum components to bring ease and comfort while steering your boat.- $783.00
- $783.00
- Unit price
- / per
-
VETUS Hydraulic cylinder for outboard steering type OBC115A (max. 115 hp) OBC115A
Hydraulic steering cylinder for outboard engines / z-drives up to 115 hp. Developed with marine-grade AISI 316L stainless-steel and aluminum components to bring ease and comfort while steering your boat.- $565.00
- $565.00
- Unit price
- / per
-
VETUS Tie bar for outboard engines OB1000
Suitable for connecting two 300 hp outboard motors so that they turn the exact same angle when the steering wheel is operated. Including connection bolts.- $797.00
- $797.00
- Unit price
- / per
-
VETUS Pressure relief valve (G1/2) (incl. tube connectors Ø 18 mm) HS42B
For VETUS maximum pressure relive valve for hydraulic steering systems.- $878.00
- $878.00
- Unit price
- / per
-
VETUS Single non-return valve (G1/2) with by-pass valve (incl. tube connectors Ø 18 mm) HS74B
Single non return valve with intergrated by-bass.- $1,236.00
- $1,236.00
- Unit price
- / per
-
VETUS Dual non-return valve (G1/2) (incl. tube connectors Ø 18 mm) HS81B
Single non return valve.- $1,117.00
- $1,117.00
- Unit price
- / per